Menu
EPAMOULD 700 series products find themselves at ease when they are used for Injection molding of technical parts. They are available from 84 shore A to 65 shore D, with inherently excellent resistance to hydrolysis and microbial attack, and very good flexibility at cold temperatures, thanks to their formulations based on PTMEG polyether polyols.
| TYPICAL PROPERTIES | METHOD | UNIT |
| Density | ISO 1183 | Kg/dm³ |
| Hardness Sh A | ISO 868 | Shore A |
| Hardness Sh D | ISO 868 | Shore D |
| Elongation at break | EN 12803 | % |
| Tensile strength | EN 12803 | Mpa |
| Tear strength | ISO 34 | KN/m |
| Abrasion resistance | EN 12770 | mm³ |
| PROCESS | ||
| Injection molding | ||
| Extrusion | ||
| CHARACTERISTICS | ||
| Trasparent | ||
| Super transparent |
| 745 D 15 | 745 D 35 | 752 D 35 | 755 D 35 | 756 D 15 | 765 D 15 |
| 1,16 | 1,16 | 1,16 | 1,17 | 1,17 | 1,15 |
| 41 | 44 | 50 | 54 | 55 | 63 |
| 390 | 400 | 370 | 350 | 370 | 300 |
| 45 | 50 | 45 | 50 | 45 | 50 |
| 140 | 140 | 135 | 140 | 160 | 165 |
| 35 | 35 | 35 | 35 | 45 | 50 |
 | | | | | |
| | |
|||
| | |
All rights reserved 2023
