Menu
| TYPICAL PROPERTIES | METHOD | UNIT |
| Density | ISO 1183 | Kg/dm³ |
| Hardness Sh A | ISO 868 | Shore A |
| Hardness Sh D | ISO 868 | Shore D |
| Elongation at break | EN 12803 | % |
| Tensile strength | EN 12803 | Mpa |
| Tear strength | ISO 34 | KN/m |
| Abrasion resistance | EN 12770 | mm³ |
| Glass transition temp. (Tg)* | DMA | °C |
| PROCESS | ||
| Injection molding | ||
| Extrusion (timing belts) | ||
| CHARACTERISTICS | ||
| Pigmented in white | ||
| FSM version available |
| 292 A 10 F 40 | 292 A 83 WF 40 | 260 D 12 | 292 A 30 | 245 D 10 | 255 D 12 |
| 1,21 | 1,21 | 1,23 | 1,2 | 1,21 | 1,23 |
| 90 | 92 | 92 | |||
| 59 | 45 | 56 | |||
| 450 | 500 | 360 | 430 | 470 | 380 |
| 50 | 52 | 55 | 50 | 50 | 58 |
| 115 | 125 | 195 | 130 | 130 | 160 |
| 30 | 35 | 45 | 30 | 35 | 35 |
| -35 | -35 | ||||
 | | | | | |
| | ||||
| |||||
| |
All rights reserved 2023
